In Observation of Safety Month

Get 25% Discount on ArcFault™


High Voltage Arc Flash Analysis


Offer ends July 31, 2019

Safety month promo

Arc Flash analysis software is recommended for electric power systems operating at 15 kV and above, in compliance with OSHA’s requirements for electrical transmission, distribution, industrial and renewable energy systems.

  • Recommended for Systems Operating at 15 kV & Above
  • OSHA 1910.269 Appendix E
  • National Electrical Safety Code – NESC2
  • Line-Ground, Line-Line, 3-Phase Arc Faults

  • Applicable for Systems from 1 kV to 800 kV
  • Auto Determination of Clearing Time
  • Protective Device Sequence-of-Operation
  • Result Analyzer with Worst-Case Scenario


Useful Resources
Ground Grid Design Made Simple

Ground Grid Design Made Simple

In this webinar, learn how to obtain accurate and economical ground grid designs by quickly identifying appropriate ground grid layouts, while efficiently conducting studies using integrated fault analysis tools. 
High Voltage Arc Flash for T&D, Industrial and Renewable Systems

High Voltage Arc Flash for T&D, Industrial and Renewable Systems

Arc flash analysis extends well beyond the scope of IEEE 1584 and NFPA 70E methodology for transmission, distribution, industrial and renewable energy systems. For many years, the industry has been lacking an ‘all-in-one’ solution for performing AC and DC arc flash analysis on LV, MV, and HV systems.
IEEE 1584-2018 Arc Flash Incident Energy Calculation Method using ETAP

IEEE 1584-2018 Arc Flash Incident Energy Calculation Method using ETAP

This webinar will provide an overview of the fundamental differences between the IEEE 1584-2018 and existing arc flash methods. To better understand how the 2018 model combines empirical and arc flash physical behavior, the presentation will cover background and insights into the model development validation.
ETAP Arc Flash

Arc Flash

Introduction to ETAP Arc Flash, analysis module. Learn how to get started with Arc Flash.
Star-Auto-Webinar-2016

Star™ Auto-Evaluation: Automated Protection & Coordination Design

This presentation will highlight how Star Auto-Evaluation software can improve your system design, safety, reliability and operation. Validate protective device settings for equipment protection, identify mis-coordination and fix zone selectivity issues, apply industry rules for system protection & coordination and significantly increase efficiency, accuracy, and design consistency.
Low-Voltage-Cable-Capacity-Sizing-Protection-against-Electric-Shock

Low Voltage Cable Capacity, Sizing & Protection against Electric Shock

ETAP provides a comprehensive, integrated design and analysis solution for electric power systems. This webinar will highlight several study cases to demonstrate the software’s capabilities in LV system modeling for cable capacity, sizing and protection against electric shock, as well as reporting and project deliverables.
Watch how ETAP can help in your industry sector