100 Item(s) found

Ground Grid System

Ground Grid System

Overview on ETAP capabilities in ground grid system design and analysis using IEEE 80 Standard and Finite Element Method (FEM).

Cable Ampacity, Sizing & Shock Protection - Part II

Cable Ampacity, Sizing & Shock Protection - Part II

Proper sizing and current de-rating ensures that cables operate to their maximum potential while providing secure and reliable operation. This webinar covers cable sizing, current carrying capacity and electrical shock protection based on IEC and British standards.

Directional Overcurrent Protection of a Wind Farm Collector

Directional Overcurrent Protection of a Wind Farm Collector

The challenges of directional protection of a wind farm collector are presented in this webinar. ETAP StarZ™ Protection & Coordination module is utilized to set and analyze protection of wind power plant collectors.

StarZ - Protection & Coordination Analysis

StarZ - Protection & Coordination Analysis

Per North American Electric Reliability Corporation (NERC), 28% of protective relay mis-operations are due to incorrect settings and logics. These errors mainly stem from the existing relay testing procedures that do not provide a proper mechanism to easily and effectively evaluate the performance of all settings, logics, and the protection system as a whole. ETAP StarZ™ is a new solution to minimize protective relay setting errors and reduce the time required to perform protection and coordination studies.

Power Quality - Fundamentals of Harmonics

Power Quality - Fundamentals of Harmonics

This webinar presents the fundamentals of harmonics, harmonic distortion and its sources, and related issues such as premature equipment failure or unplanned downtime.
The presentation will demonstrate how to identify, analyze, and minimize or eliminate harmonics problems using the ETAP software.

Induction Machine - Machine Fundamentals

Induction Machine - Machine Fundamentals

This webinar covers machine fundamentals such as Conversion of Energy, Steady-State Operation, Motor / Generator, Ratings & Motor Equations, Efficiency & Power Factor vs. Loading, Motor Feeder Cable and Load Flow Solutions.

Induction Machine - Machine Dynamic Behavior

Induction Machine - Machine Dynamic Behavior

This webinar discusses the induction motor dynamic behavior for acceleration, deceleration and steady-state speed control conditions. It highlights how each of the key fundamental motor dynamic characteristics applies to different applications such as motor starting, fast-bus transfer, and motor parameter estimation and tuning.

Induction Machine - Motor Protection

Induction Machine - Motor Protection

This webinar presents the criterion and industry guidelines for protection of motors in medium and low voltage systems, typical induction motor protection schemes and suggested settings for protective devices. The application of Automated Protection & Coordination evaluation tool for design, verification, and correction of settings are also demonstrated.

ETAP Project Merge - Project Collaboration & Data Management

ETAP Project Merge - Project Collaboration & Data Management

Watch this webinar on project merge and learn how to use project merge to improve productively and accelerate project schedules.

User-Defined Dynamic Models (UDM)

User-Defined Dynamic Models (UDM)

The User-Defined Dynamic Models (UDM) program allows for a more robust “element-level” and “plant-level” control system simulation. ETAP UDM performance is optimized for simulation of energy storage devices, wind turbine controls, PV system inverters, and generic machine models.