Resource Center

Prime content - login required
Directional Overcurrent Protection of a Wind Farm Collector

Directional Overcurrent Protection of a Wind Farm Collector

47:54 Webinars

The challenges of directional protection of a wind farm collector are presented in this webinar. ETAP StarZ™ Protection & Coordination module is utilized to set and analyze protection of wind power plant collectors.

Inclusión de Generación de Energía por Fuentes Renovables en los Sistemas de Potencia

Inclusión de Generación de Energía por Fuentes Renovables en los Sistemas de Potencia

1:00:00 Webinars

Este video muestra funciones de ETAP para hacer un análisis más completo de fuentes de energía renovable en las redes eléctricas, se incluyen en el video arreglos de paneles fotovoltaicos y aerogeneradores. Además, aprenderá a modelar su sistema tomando en cuenta las variaciones de potencia a través del tiempo, propias de este tipo de fuentes con la aplicación de Flujo de Potencia en el Dominio del Tiempo.

IEEE 1584-2018 Arc Flash Incident Energy Calculation Method using ETAP

IEEE 1584-2018 Arc Flash Incident Energy Calculation Method using ETAP

1:24:01 Webinars

This webinar will provide an overview of the fundamental differences between the IEEE 1584-2018 and existing arc flash methods. To better understand how the 2018 model combines empirical and arc flash physical behavior, the presentation will cover background and insights into the model development validation.

StarZ - Protection & Coordination Analysis

StarZ - Protection & Coordination Analysis

44:37 Webinars

Per North American Electric Reliability Corporation (NERC), 28% of protective relay mis-operations are due to incorrect settings and logics. These errors mainly stem from the existing relay testing procedures that do not provide a proper mechanism to easily and effectively evaluate the performance of all settings, logics, and the protection system as a whole. ETAP StarZ™ is a new solution to minimize protective relay setting errors and reduce the time required to perform protection and coordination studies.

High Voltage Arc Flash for T&D, Industrial and Renewable Systems

High Voltage Arc Flash for T&D, Industrial and Renewable Systems

1:12:23 Webinars

Arc flash analysis extends well beyond the scope of IEEE 1584 and NFPA 70E methodology for transmission, distribution, industrial and renewable energy systems. For many years, the industry has been lacking an ‘all-in-one’ solution for performing AC and DC arc flash analysis on LV, MV, and HV systems.

Faulted Circuit Indicators Webinar

Faulted Circuit Indicators Webinar

42:50 Webinars

This webinar covers the process of modeling, simulation and protection & coordination study of distribution feeders equipped with Fault Circuit Indicators in ETAP.  

Consulting-Specifying Engineer Magazine’s 2018 Product of the Year Awards

Consulting-Specifying Engineer Magazine’s 2018 Product of the Year Awards

ETAP, the leading developer of electrical power system analysis & operation software, won two Product of the Year Awards in Consulting-Specifying Engineer (CFE) magazine’s annual best product competition.
CFE created the annual reader-choice program to provide their readers with information about the top new products in the industry. The 2018 winners were selected by CFE’ readers from more than 64 entries in 12 categories.

IEEE 1584-2018 Arc Flash Incident Energy Calculation

IEEE 1584-2018 Arc Flash Incident Energy Calculation

A new challenge is ahead for the electrical safety community. The revision process of IEEE Std. 1584 Guide to Performing Arc Flash Hazard Calculations is almost complete. Engineers everywhere will be challenged with understanding how to apply this new model.

SQA

SQA

20 of 487 results