123 Item(s) found

Learn about ETAP Automated Fault Analysis Software

Learn about ETAP Automated Fault Analysis Software

ETAP Automated Fault Analysis System (AFAS) solution provides Real-Time and advanced analytics of electrical faults for your complex networks. Using the ETAP digital twin combined with disturbance records, engineers and operators have a clear forensic picture of any electrical fault in the network. Using proven ETAP analysis solvers, AFAS identifies faults, including fault type, start time, protection trip time, fault magnitudes, and fault distance/impedances. A novel signal injection features allow users to playback recorded data into the protection model to compare "as designed" vs. "as found" relay response. This comparison using ETAP electrical digital twin is used to validate system response per the configured protection scheme, and the sequence of operation was followed within expected time durations.

Learn how the ETAP FlickerMeter Calculator improves power quality

Learn how the ETAP FlickerMeter Calculator improves power quality

FlickerMeter is part of the Power Quality applications in ETAP. FlickerMeter allows importing CSV-formatted data files and analyzes up to 20 signals at each run, to evaluate flicker compliance against emission limits. Flicker calculations comply with IEC 61000-4-15 which is the standard for electromagnetic compatibility (EMC) and the calculation provides instantaneous, short-term (PST), and long-term (PLT) flicker indices based on a voltage waveform loaded into the calculator.

Unbalanced Network Harmonic Analysis: Power System Infrastructure Challenges & Active Filter Technology

Unbalanced Network Harmonic Analysis: Power System Infrastructure Challenges & Active Filter Technology

The integration of electric vehicles (EVs), PV systems, battery energy storage systems (BESS), and more has presented us with exciting opportunities and challenges. One such challenge is the need for unbalanced network harmonic analysis, especially when dealing with single-phase charging vehicles and inverter controls.

How to Visualize ZSI Schemes in ETAP: Enhancing Safety and Arc Flash Mitigation Techniques

How to Visualize ZSI Schemes in ETAP: Enhancing Safety and Arc Flash Mitigation Techniques

Discover how this powerful simulation tool evaluates, verifies, and confirms the operation and selectivity of the ZSI scheme for different types of faults. The ZSI capabilities empower engineers and professionals like you to take control of electrical power system protection and analysis, enhance safety, minimize equipment damage, and validate arc flash mitigation techniques and scenarios.

Understanding Arc-Flash Calculations: Overcoming Challenges of Short-Circuit Standards

Understanding Arc-Flash Calculations: Overcoming Challenges of Short-Circuit Standards

Are you curious about the limitations of short-circuit standards and their inadequacy in addressing arc-flash incident energy calculations? In this presentation, we will review the challenges posed by these standards with an emphasis on IEC 60909-2016 and provide you with an explanation of ETAP arc-flash solutions to these limitations.

How to safeguard workers and elevate Arc Flash Hazard Analysis to new heights with ArcBlok™ and ETAP

How to safeguard workers and elevate Arc Flash Hazard Analysis to new heights with ArcBlok™ and ETAP

When it comes to running an arc flash hazard analysis study, it's crucial to identify equipment that may expose workers to high incident energy. One of the most hazardous areas is where line side arcing faults can occur. To address this challenge, Annex 0.2.3 of the 70E 2021 standard outlines various industry-accepted incident energy mitigation techniques. However, not all methods effectively tackle line side arcing faults. During the demonstration, you will acquire valuable knowledge on NFPA 70E  endorsed mitigation techniques as well as details on ETAP modeling of the ArcBlok technology.

What's New in ETAP 2023 - Introduction to New Product Modules & Enhancements

What's New in ETAP 2023 - Introduction to New Product Modules & Enhancements

ETAP 2023 version 22.5 offers innovative solutions and features with numerous enhancements and time-saving improvements, empowering ETAP customers with technology and best practices to be safer, more reliable, efficient, compliant, and sustainable.

Stability Studies for Power Systems with DERs

Stability Studies for Power Systems with DERs

As more Distributed Energy Resources (DERs) are added and mixed into the grid, the need to effectively evaluate and validate the dynamic response of power systems has become essential for grid resiliency, reliability, and security. In this webinar, learn how ETAP's Transient Stability module addresses the needs and challenges of stability studies for power systems with DERs. The module provides comprehensive analysis of the system's behavior during disturbances, enabling engineers to make informed decisions for improving system stability and ensuring grid reliability.

Distribution Automation with Model-Based Volt/Var Optimization (VVO)

Distribution Automation with Model-Based Volt/Var Optimization (VVO)

This webinar discusses industry challenges and benefits of a model-based VVO, including practical applications for electric distribution systems. Gain valuable insights and benefits from ETAP customers enjoying a proactive reduction in energy waste, reduced CO2 emissions, consumption reduction, and extended equipment lifetime.

ETAP Intelligent Distribution Load Shedding - iDLS - Solution Demonstration

ETAP Intelligent Distribution Load Shedding - iDLS - Solution Demonstration

The ETAP iDLS solution leverages advanced technologies such as artificial intelligence and machine learning to provide accurate predictions of load demand and provide real-time operational insights to help grid operators make informed decisions. Additionally, iDLS integrates with existing grid infrastructure and control systems, making it easy to deploy and integrate into existing power systems. By providing a centralized load management solution, iDLS helps ensure grid stability and continuity of power supply, while minimizing the impact on connected customers and preventing blackouts and unplanned outages.