Resource Center

Cable Thermal Analysis - Part III

• 40:00
• Webinar

This Cable Thermal Analysis webinar explains how to design cable systems to operate to their maximum potential while providing a secure and reliable operation.

ETAP 18 - Modeling and Deliverables

• 41:28
• Webinar

ETAP 18 offers a powerful set of new features and capabilities for system modeling, analysis, and operations. This webinar covers many time-saving enhancements in addition to the new reports and deliverables to improve productivity and user experience.

High Voltage Arc Flash for T&D, Industrial and Renewable Systems

• 1:12:23
• Webinar | Tutorial

Arc flash analysis extends well beyond the scope of IEEE 1584 and NFPA 70E methodology for transmission, distribution, industrial and renewable energy systems. For many years, the industry has been lacking an ‘all-in-one’ solution for performing AC and DC arc flash analysis on LV, MV, and HV systems. 

ETAP ArcFault™ analysis software is used for performing Arc Flash Analysis in compliance with OSHA’s requirements in OSHA 1910.269 Appendix E for electric transmission & distribution utilities and renewable energy power system, specifically for calculating arc fault incident energy for 15 kV and above.

Inclusión de Generación de Energía por Fuentes Renovables en los Sistemas de Potencia

• 1:00:00
• Webinar

Este video muestra funciones de ETAP para hacer un análisis más completo de fuentes de energía renovable en las redes eléctricas, se incluyen en el video arreglos de paneles fotovoltaicos y aerogeneradores. Además, aprenderá a modelar su sistema tomando en cuenta las variaciones de potencia a través del tiempo, propias de este tipo de fuentes con la aplicación de Flujo de Potencia en el Dominio del Tiempo.

IEEE 1584-2018 Arc Flash Incident Energy Calculation Method using ETAP

• 1:24:01
• Webinar

This webinar will provide an overview of the fundamental differences between the IEEE 1584-2018 and existing arc flash methods. To better understand how the 2018 model combines empirical and arc flash physical behavior, the presentation will cover background and insights into the model development validation.

Faulted Circuit Indicators

• 42:50
• Webinar

This webinar covers the process of modeling, simulation and protection & coordination study of distribution feeders equipped with Fault Circuit Indicators in ETAP.  

Ground Grid System

• 8:21
• Webinar

Overview on ETAP capabilities in ground grid system design and analysis using IEEE 80 Standard and Finite Element Method (FEM).

Cable Ampacity, Sizing & Shock Protection - Part II

• 28:31
• Webinar

Proper sizing and current de-rating ensures that cables operate to their maximum potential while providing secure and reliable operation. This webinar covers cable sizing, current carrying capacity and electrical shock protection based on IEC and British standards.

Directional Overcurrent Protection of a Wind Farm Collector

• 47:54
• Webinar

The challenges of directional protection of a wind farm collector are presented in this webinar. ETAP StarZ™ Protection & Coordination module is utilized to set and analyze protection of wind power plant collectors.

StarZ - Protection & Coordination Analysis

• 44:37
• Webinar

Per North American Electric Reliability Corporation (NERC), 28% of protective relay mis-operations are due to incorrect settings and logics. These errors mainly stem from the existing relay testing procedures that do not provide a proper mechanism to easily and effectively evaluate the performance of all settings, logics, and the protection system as a whole. ETAP StarZ™ is a new solution to minimize protective relay setting errors and reduce the time required to perform protection and coordination studies.