🛒 Your basket is empty
🛒{{ model.NumberOfItems }} item(s): {{ model.Total }}
통합된 AC & DC 설계 & 해석
모델 중심의 SCADA, EMS, PMS, ADMS & SAS
우수한 기능의 제어기 & 관리 시스템
A Unified Digital Twin Platform설계, 작동 및 자동화
Integrated Power Flow, Short Circuit, Arc Flash analysis and more
Integrated Protective Device Coordination software
직류 조류 계산, 직류 고장해석, 직류 아크플래시, 배터리 사이징 및 방전 해석
과도 안정도, 발전기 구동, 풍력 터빈 발전기(WTG) 해석, 사용자 정의 동적 모델, 매개변수 예측, EMT 소프트웨어
케이블 시스템 니즈에 맞는 완벽한 솔루션
다양한 전력 공급원 및 다수의 운영 조건을 모니터링, 예측 및 관리하는 통합된 소프트웨어 솔루션
Model and simulate wind farm operation with grid connection
Fast, accurate design and analysis of ground grid system & earthing mat
Model unlimited solar panels individually or in groups to form a solar array
Design, analyze, and size cables in underground raceway systems
배터리 에너지 저장 시스템 (BESS)의 통합은 시스템 신뢰성과 성능을 향상시킵니다.
High penetration of solar PV energy fed into an electrical grid brings its share of challenges making the grid volatile which requires stabilizing variable energy. This presentation addresses one such challenge, of voltage profile improvement with reactive power compensation at the point of interconnection. A solar PV plant is rated in terms of power (either AC or DC) and is typically not rated for their reactive counterparts (MVAr). IEEE 1547/UL 1741 compliant inverters will typically not have reactive power capability and operate with a unity power factor. Although modern inverters have a capacity to supply reactive power in the range of +0.9 lead/-0.9 lag, the PV plant is rated based on the AC power supplied by the inverter at unity PF. Operational data sourced from various plants in India suggest that a typical utility-scale PV plant provides reactive energy in the range of 7% to 10%. This leads to an inherent error in the per-unit cost calculation, as when the inverter providing the reactive power, the active power is hampered. This paper showcases a cost-to-benefit analysis of various scenarios, such as unity power.
Adding distributed generation sources to existing power distribution systems and the implementation of islanding microgrid capability introduce protection and control challenges if not properly designed. Each new generator may present a new source ground fault current to the system, which can result in unanticipated breaker operation. Energy Systems Group, was using ETAP to model the system and check coordination of local and remote breakers can reduce downtime and troubleshooting.
Microgrid Analysis & Design is an essential step for Microgrid Implementation. Upfront design and analysis of the target microgrid system, whether for brownfield or green-field Microgrid implementation, can help drive both technical and financial benefits, including determining optimized generation assets required to meet the microgrid objectives as well as a projection of return on investments. Analysis & design from safety, reliability, and financial perspective are critical for successful microgrid implementation to minimize the impact and rework during the installation phase. This presentation will provide recommendations on best practices for Microgrid Analysis & Design.
As more Distributed Energy Resources (DERs) are added and mixed into the grid, the need to effectively evaluate and validate the dynamic response of power systems has become essential for grid resiliency, reliability, and security. In this webinar, learn how ETAP Transient Stability Analysis addresses needs and challenges of stability studies for power systems with integrated DERs.
This webinar demonstrated how the integration of battery energy storage systems improves system reliability and performance, offers renewable smoothing, and can increase profit margins of renewable farm owners.
An overview to photovoltaic array modeling and simulation using the ETAP software for solar panel sizing and grid impact analysis.
An overview of wind farm modeling and simulation using the ETAP Renewable module.
This webinar examines the microgrid controller’s architecture, hardware deployment workflow, and a range of advanced monitoring tools. Learn how ETAP Digital Twin platform enables the design and deployment of ETAP's Intelligent μGrid™ solution.
ETAP's μGrid™ solution combines model-driven microgrid controller hardware with advanced power management software to unlock system resiliency, optimized cost, security, and sustainability. This webinar focuses on microgrid design and software-based validation.
This webinar demonstrates how ETAP can help you optimally utilize limited power generation resources in an islanded or grid-tied microgrid environment.
ETAP Battery Energy Storage Systems solution helps improve system reliability and performance, offers renewable smoothing, and can increase the profit margins of renewable farm owners.