🛒 Your basket is empty
🛒{{ model.NumberOfItems }} item(s): {{ model.Total }}
통합된 AC & DC 설계 & 해석
모델 중심의 SCADA, EMS, PMS, ADMS & SAS
우수한 기능의 제어기 & 관리 시스템
A Unified Digital Twin Platform설계, 작동 및 자동화
Filter by
Didn't find what you are looking for? We're here to help!
218 Item(s) found
This presentation focuses on HV arc flash hazard analysis, as part of a multi-voltage AF study (115, 34.5, 13.8, and 0.22 kV) for one of the three largest utilities in South America with hydro and renewables generation and T&D. It demonstrates the versatility of the ETAP ArcFault™ to assist in the calculations and estimates of electric arc currents and incident energy level for HV substation equipment. The presentation discusses how ArcFault study results were used to select engineering and administrative control strategies, personal protective equipment (PPE), changes in protection schemes and adjustments to reduce electrical risks in operation & maintenance of electrical T&D systems.
Since the release of IEEE 1584-2018, the industry has been challenged to reach a consensus on applying the new standard. The most significant application “pain” so far has been identifying actual equipment data for input to the study, including bus gap and electrode configurations in the equipment. A case study of an arc flash analysis for a large university campus with MV and LV power distribution equipment of different types, vintages, and manufacturers is presented. The presentation highlights selection of electrode configuration(s) for various equipment types and voltage levels and correct application of arc current and enclosure size correction factors to significantly reduce the data entry time and effort. The presentation will cover upcoming IEEE P1584.1 revisions to apply IEEE 1584 for arc-flash hazard calculations directly from the revision subgroup chair.
Case study of a a power system study, which involved the replacement of an extensive UPS system at a data center. The studies included short-circuit, protective device coordination, and arc-flash hazard analysis for both the AC and DC systems consistent with the NFPA 70E 2018 and IEEE 1584 2018 Standards. The DC equipment as installed required mitigation efforts due to high incident energies. This presentation details the analysis, findings, and recommended mitigation for anyone embarking on similar retrofit or expansion studies.
HyperloopTT focuses on systems that moves people and goods safely, efficiently and sustainably; bringing airplane speeds to the ground by using passive levitation and electric linear propulsion in a low-pressure tube. This presentation discusses the complex power system challenges and collaboration with ETAP for conceptual design and detailed engineering of the 1st commercial prototype. The companies will then thereafter collaborate with ETAP and migrate the digital twin into operations to validate and improve the prototype design and extend to upcoming long-distance commercial & freight systems.
This case study for Mumbai Metro Rail covers Operator Training Simulator (OTS), where the customer is specifically looking for a simulation environment to test their operations in a real-time environment for the following reasons: avoid errors, enhance communication & management of new crews, train inexperienced operators, certification and competency for operators, situational awareness & workload management. ETAP OTS helped Schneider Electric, India, to give the right solution for Metro Mumbai. ETAP OTS utilizes a model-driven power network that enables the customer to approve switching procedures, perform predictive simulations to verify correct switching actions with software-in-the-loop, replicate real-world situations with unlimited scenarios for knowledge transfer via a trainer-to-trainees learning environment.
The presentation covers: physical modeling of rail systems, techniques to speed modeling development, eTraX modular integration in ETAP, railroad & power system model validation, railroad & power system model calibration, integrating railroad operations & power system analysis. Practical lessons learned that address project challenges and solutions are discussed. The value of modeling and analysis, engineering deliverables, why they have value, and creating value streams are presented.
스마트 시티의 목표는 효율적이고 안전하며 지속 가능하고 건강한 삶을 개발하는 것입니다. 스마트 시티에서 DER 및 ICT 인프라의 출현은 ADM으로 구동되는 배전 유틸리티 제어실 운영과 함께 새로운 기술에 대한 도전과 많은 중요한 기회들을 제시합니다. 이 프레젠테이션에서는 도시 계획에서 운영 탄력성 및 지속 가능한 도시 성장에 이르기까지 스마트 시티가 어떻게 기능하는지 설명하며, 유틸리티 제어실 ADMS 애플리케이션을 활용하고 지원할 수 있습니다.
Noida Power Company Limited는 배전망의 운영, 정전 대응 및 수익 증대를 개선하기 위해 ETAP ADMS를 구현했습니다. 이 프레젠테이션에서는 ETAP ADMS를 소개하고 NPCL이 솔루션을 활용하여 수익을 극대화하고 신뢰성을 높이며 고객 만족도를 향상시킨 방법을 보여줍니다.
통합 전력 시스템 모델링, 분석 및 시범 운영을 위한 스마트형 데이터 센터 솔루션은 데이터 센터의 설계 및 운영에서 매우 중요해졌습니다. 시스템 계획 초기에 적절한 설계 결정을 내리는 것이 에너지 효율성 전략에 가장 중요한 요소로, 총 소유 비용을 감소시키고 엔지니어링 및 시설 운영의 신뢰도를 향상시킵니다. 웨비나에서 통합된 설계, 분석, 실시간 예측 시범 운영 및 데이터 센터 운영을 위한 ETAP의 디지털 융합 솔루션을 소개합니다.
ETAP Digital Twin represents virtual models of a real-world power system under various physical and operational conditions. ETAP offers an integrated Electrical Digital Twin platform enriched with intelligent solutions. ETAP Electrical Digital Twin is built on a multi-dimensional foundation, enabling efficient design, analysis, management, operations, and a complete digital transformation of projects while adapting to evolving system changes.
This brief video will teach you how to use ETAP in five minutes. We'll start off creating a brand new project. Adding a power source, loads, cables, breakers and relays, and then run power studies. For in-depth training on how to design and analyze with ETAP software, sign up for one of our 200+ workshops around the world: https://etap.com/events To see what's included in the ETAP Base Package, go to https://etap.com/packages/etap-base-package
In this webinar, we will introduce new features & solutions for Power System Monitoring, Control, Training Simulator, Situational Intelligence, Advanced Protection, Automation Analysis & Asset Management and Digital-Twin Driven Automation & Renewable Energy Power Management.
ETAP Digital Twin is an integral building block in all stages of an electrical system’s life cycle. Join & learn how you can leverage it for shortened design time, validation & transition of digital twin model to operations, early decision support, identification of operation problems & their cause, accelerated engineer & operator training, asset performance monitoring & optimization.
Today’s power systems depend on renewable energy resources to meet their load demand and are typically interconnected through inverters. This webinar demonstrates how inverter-based resources are modeled for short circuit studies. It will also review various dynamic modeling approaches offered by ETAP and discuss merits and limitations of each approach.
Learn about ETAP's one-stop solution with intelligent interface views and core capabilities to create, configure, customize, and manage the digital twin model of your electrical power system.
The webinar covers the fundamentals & theory of CT saturation, the effects on equipment, and how to avoid CT saturation for certain applications. It includes a demonstration on how to perform CT saturation analysis and CT sizing using ETAP.
Reliable, secure and efficient operation of power systems is becoming increasingly important due to drastic changes in technology and industry structure. Learn how Optimal Power Flow enables you to improve the electrical and financial performance of electric power systems while maintaining system resiliency & security.
Proper sizing and current derating ensures that cables operate to their maximum potential while providing secure and reliable operation. Learn about design and application requirements to properly size and analyze cable systems based on IEEE and North American cable standards and guidelines: IEEE 399, ICEA P-54-440, NEC NFPA 70
The ETAP electromagnetic field exposure analysis tool is integrated with the underground cable systems (UGS) analysis module, and it determines the worst-case electromagnetic fields produced by conductors in underground raceways. The tool handles various 3-phase conductor layouts including flat and trefoil as well 1/C and 3/C 1-phase cables, dc cables, etc. The tool uses balanced & unbalanced load-flow currents and angles to determine the location and surface-level height of the worst-case magnetic field because of all conductors in the raceway.
ETAP UDM is used to build complex control diagrams for machines & renewable energy systems via a graphical editor and includes solvers for simulating system dynamics. Learn how to use UDM Plot View to compare & analyze these dynamic simulation results from single or multiple cases in a quick & efficient manner.