53 Item(s) found

ETAP 20.5 New Features and Capabilities

ETAP 20.5 New Features and Capabilities

This webinar highlights integrated power analysis modules, electrical safety capabilities, and operational compliance solutions, released in ETAP 20.5. Learn about major features & capabilities plus 100’s of enhancements and time-saving improvements added to existing ETAP modules

NFPA 70E 2021 – Hazard Evaluation of Stored Capacitor Energy

NFPA 70E 2021 – Hazard Evaluation of Stored Capacitor Energy

This webinar provides a summary of the major changes to NFPA 70E 2021 and demonstrates how engineers can use ETAP 20.5 to evaluate the impact of connected and disconnected capacitor energy, calculate arc blast hazard related protection boundaries and how to print Capacitor Hazard Labels in compliance with NFPA 70E 2021. 

Distribution Automation with Model-Based Volt/Var Optimization (VVO)

Distribution Automation with Model-Based Volt/Var Optimization (VVO)

This webinar discusses industry challenges and benefits of a model-based VVO, including practical applications for electric distribution systems. Gain valuable insights and benefits from ETAP customers enjoying a proactive reduction in energy waste, reduced CO2 emissions, consumption reduction, and extended equipment lifetime.

Intelligent Microgrid Management - Part 2

Intelligent Microgrid Management - Part 2

This webinar examines the microgrid controller’s architecture, hardware deployment workflow, and a range of advanced monitoring tools. Learn how ETAP Digital Twin platform enables the design and deployment of ETAP's Intelligent μGrid™ solution.

Enterprise Protection & Asset Management System

Enterprise Protection & Asset Management System

Protection assets are critical to the safety and reliability of power systems. Often utilities face the challenge of maintaining and managing protection equipment and rely upon different systems to monitor, manage, and optimize protection settings. ETAP eProtect™ solution provides lifecycle management of protection assets by combining a centralized protection settings management system with automated protection and coordination tools. eProtect allows for device management, relay settings optimization, and management of change across the enterprise.

Motor Protection - Characteristics & Applications

Motor Protection - Characteristics & Applications

This webinar presents the criterion and industry guidelines for motor protection in medium and low voltage systems, typical induction motor protection schemes and suggested settings for protective devices. The application of Automated Protection & Coordination evaluation tool for design, verification, and correction of settings are also demonstrated.

iDLS™ - Intelligent Load Shedding

iDLS™ - Intelligent Load Shedding

Learn how ETAP iDLS offers an intelligent model-driven load curtailment solution with optimization techniques to shed the minimum required distribution feeder loads based on reliability indices, quality of supply, and availability of distributed generation.

eMT™ - Electromagnetic Transient Program

eMT™ - Electromagnetic Transient Program

This webinar demonstrates EMT simulations of AC power systems connected to power electronic interfaced renewables (both transmission or distribution levels), applications of FACTS devices, and synchronous condensers to mitigate network dynamic response concerns and representation of complex control systems.

ETAP Intelligent Digital Substation Solution

ETAP Intelligent Digital Substation Solution

ETAP integrates model-driven software and hardware, including intelligent controllers with real-time operational digital twins. This webinar demonstrates how ETAP Digital Substation solution allows you to monitor and verify controller actions and system response during the design, implementation and operation of the controllers.

Arc Flash Safety European/German Standard DGUV-I 203-077Arc Flash Hazard Calculations in ETAP

Arc Flash Safety European/German Standard DGUV-I 203-077Arc Flash Hazard Calculations in ETAP

This webinar presents the European/German standard DGUV-I 203-077 for arc flash hazard calculations. This method, just like IEEE 1584-2018, is in use in many European countries. We will compare the German Arc Flash methodology to IEEE 1584-2018 and introduce ETAP tools available for Arc Flash calculations based on this standard. Application examples as well as features & capabilities will be presented.

eOTS™ - Operator Training Simulator

eOTS™ - Operator Training Simulator

This webinar demonstrates how eOTS™ helps to develop and improve operator competency through real-world simulated learning, resulting in improved power system design and operation.

Stability Studies for Power Systems with DERs

Stability Studies for Power Systems with DERs

As more Distributed Energy Resources (DERs) are added and mixed into the grid, the need to effectively evaluate and validate the dynamic response of power systems has become essential for grid resiliency, reliability, and security. In this webinar, learn how ETAP Transient Stability Analysis addresses needs and challenges of stability studies for power systems with integrated DERs.

DC Arc Flash Analysis

DC Arc Flash Analysis

This webinar discusses how well ETAP DC Arc Flash method results correlate with the test measured incident energies. The comparisons to be discussed include arc flash tests in photovoltaic and battery/rectifier powered systems. Furthermore, this webinar introduces major improvements to the DC Arc Flash calculation methods in ETAP 20; such as the “Incident Energy Subtraction Method" and new Worst-Case Datablocks from the DC Arc Flash Result Analyzer.

ePPC™ – Power Plant Controller

ePPC™ – Power Plant Controller

The webinar shows how ePPC leverages an electrical digital twin from design to validation and automation of renewable power plants for maximum yields and stability of the grid.

Motor Acceleration Studies

Motor Acceleration Studies

Learn how to perform Motor Acceleration Studies on any system, regardless of the project stage and available input data; from conceptual design, to FEED, to daily operations. Topics include Impact of Motor Starting, Data Requirements and Motor Parameter Estimation, Dynamic Motor Starting, Motor Acceleration using Transient Stability and Automated Motor Start and Result Analyzer.

eMTCoSim™ - CoSimulation of Electromagnetic & Phasor Transients

eMTCoSim™ - CoSimulation of Electromagnetic & Phasor Transients

Learn how ETAP Transient Stability program and Electromagnetic Transients Program (eMT) are combined in eMTCoSim mode to provide hybrid simulations of Phasor and Transients domains to collectively solve large, complex, and multi-disciplinary system models with higher fidelity.

ETAP 20 - A Unified Digital Twin Platform

ETAP 20 - A Unified Digital Twin Platform

ETAP 20 Release makes advances in data management, efficiency, flexibility, interoperability, asset modeling, and network analysis applications. In this webinar, learn about some of the significant features and powerful capabilities that are a must have in your power system tool-set.

Intelligent Microgrid Management - Part 1

Intelligent Microgrid Management - Part 1

ETAP's μGrid™ solution combines model-driven microgrid controller hardware with advanced power management software to unlock system resiliency, optimized cost, security, and sustainability. This webinar focuses on microgrid design and software-based validation.

ETAP Digital Twin: Design, Operation & Automation

ETAP Digital Twin: Design, Operation & Automation

An orchestration of model-driven design, real-time operation, and intelligent controls to achieve fast, proactive decision-making.

Battery Energy Storage Systems

Battery Energy Storage Systems

This webinar demonstrated how the integration of battery energy storage systems improves system reliability and performance, offers renewable smoothing, and can increase profit margins of renewable farm owners.