Didn't find what you are looking for?
We're here to help!
216 Item(s) found
ETAP 20 Release makes advances in data management, efficiency, flexibility, interoperability, asset modeling, and network analysis applications. In this webinar, learn about some of the significant features and powerful capabilities that are a must have in your power system tool-set.
ETAP's μGrid™ solution combines model-driven microgrid controller hardware with advanced power management software to unlock system resiliency, optimized cost, security, and sustainability. This webinar focuses on microgrid design and software-based validation.
An orchestration of model-driven design, real-time operation, and intelligent controls to achieve fast, proactive decision-making.
This webinar demonstrated how the integration of battery energy storage systems improves system reliability and performance, offers renewable smoothing, and can increase profit margins of renewable farm owners.
ETAP Voltage Stability software helps to accurately identify the system maximum load carrying capacity limits and reactive power compensation requirements. In this webinar, learn how to identify voltage stability limits, simulate the impact of voltage instability, perform sensitivity analysis, calculate & report instability indices and assess results via network views & plots.
This webinar introduces ETAP NetPM™ and demonstrates how this powerful time-saving solution for topology synchronization, data integration, model coordination & validation, and information transfer benefits users across the entire life cycle of the electrical network from modeling to operation and from engineering-consultants to owner-operators.
etap iCE Remote Terminal Unit provides a scalable data acquisition and control RTU with multiple communication options.
etap iCE Gateway collects data from multiple devices and protocols and convert them to a single output protocol.
Fully integrated suite of software products that provides mission critical power
management solutions, from modeling to real-time, model-based monitoring and operation.
Cable Sizing & Shock Protection software module offers a powerful tool to save time and improve accuracy for low & high voltage cable calculation and electrical design using the latest French Cable Standard.
This Cable Thermal Analysis webinar explains how to design cable systems to operate to their maximum potential while providing a secure and reliable operation
ETAP ArcFault™ software is recommended for performing Arc Flash Analysis on electrical utilities and renewable power systems operating at 15 kV and above.
ETAP Arc Flash Analysis software is used to perform arc flash analysis for systems from 0.208 kV to 15 kV in accordance with IEEE 1584-2018 “IEEE Guide for Performing Arc Flash Hazard Calculations.” The software determines the incident energy and arc flash boundary values required to comply with NEC equipment labeling. It also provides hazard evaluation for shock protection and arc flash PPE according to NFPA 70E 2018.
Arc flash analysis extends well beyond the scope of IEEE 1584 and NFPA 70E methodology for transmission, distribution, industrial and renewable energy systems. For many years, the industry has been lacking an ‘all-in-one’ solution for performing AC and DC arc flash analysis on LV, MV, and HV systems.
This webinar will provide an overview of the fundamental differences between the IEEE 1584-2018 and existing arc flash methods. To better understand how the 2018 model combines empirical and arc flash physical behavior, the presentation will cover background and insights into the model development validation.
New Standard, New Method, New Learning Curve
Proper sizing and current de-rating ensures that cables operate to their maximum potential while providing secure and reliable operation. This webinar covers cable sizing, current carrying capacity and electrical shock protection based on IEC and British standards.
The challenges of directional protection of a wind farm collector are presented in this webinar. ETAP StarZ™ Protection & Coordination module is utilized to set and analyze protection of wind power plant collectors.
Per North American Electric Reliability Corporation (NERC), 28% of protective relay mis-operations are due to incorrect settings and logics. These errors mainly stem from the existing relay testing procedures that do not provide a proper mechanism to easily and effectively evaluate the performance of all settings, logics, and the protection system as a whole. ETAP StarZ™ is a new solution to minimize protective relay setting errors and reduce the time required to perform protection and coordination studies.
Electrical Power System Analysis & Operation Software
Subscribe to ETAP News
Antigua and Barbuda
Bosnia and Herzegovina
British Indian Ocean Territory
Central African Republic
Congo - Brazzaville
Congo - Kinshasa
Democratic Republic of the Congo
French Southern Territories
Heard Island and McDonald Islands
Isle of Man
Northern Mariana Islands
Papua New Guinea
Saint Pierre and Miquelon
Sao Tome and Principe
St. Vincent & The Grenadines
Svalbard and Jan Mayen
Trinidad and Tobago
Turks and Caicos Islands
United Arab Emirates
United States Minor Outlying Islands
Wallis and Futuna
© 2023 Operation Technology, Inc. All rights reserved.