247 Item(s) found

Navigating Grid Stability in Renewable Energy-Rich Environments: ETAP's Operator Training Simulator

Navigating Grid Stability in Renewable Energy-Rich Environments: ETAP's Operator Training Simulator

In transmission systems grappling with the unpredictability of renewable energy sources, ETAP's Operator Training Simulator (OTS) provides a cutting-edge solution, leveraging digital twin technology and real-time data to anticipate system performance uncertainties, as demonstrated through its integration into Web Aruba's operations, enhancing grid resilience and efficiency amidst renewable energy variability.

Development of a Python Optimization Model for the Analysis and Planning of PMU Locations in Electrical Networks​

Development of a Python Optimization Model for the Analysis and Planning of PMU Locations in Electrical Networks​

The proposed methodology aims to seamlessly integrate an optimization algorithm with etapPY, minimizing the number of PMUs required, strategically placing them within the electrical network, and enhancing overall system observability to empower network operators with advanced analytical tools for comprehensive monitoring and analysis.

Drakenstein Municipality Control Center uitlizing ETAP SCADA & DMS to communicate with and control substations

Drakenstein Municipality Control Center uitlizing ETAP SCADA & DMS to communicate with and control substations

Drakenstein Municipality sought an OEM partner to establish a SCADA Main Station in their Control Centre, supervising the distribution network of the Dalweiding Substation supply area, integrating substation protection and control solutions using the IEC 61850 standard, with ETAP chosen for its digital-twin concept, model-driven approach, and modular scalability, facilitated by Altek Solutions.

Optimizing operations with electrical Load Management System at FFC chemical Plant

Optimizing operations with electrical Load Management System at FFC chemical Plant

Thisproject highlights ETAP's collaboration with Fauji Fertilizer Company Limited (FFC) of Pakistan to replace their existing Electrical Load Management System (ELMS) with ETAP’s iLS™ (Intelligent Load Shedding System), integrating IEDs for real-time monitoring and load calculation, utilizing ETAP’s digital-twin platform and model-driven solution to effectively meet load shedding requirements and enhance system reliability.

How to Simulating High Voltage Short Circuit in Scale Cascade Transmissions Lines

How to Simulating High Voltage Short Circuit in Scale Cascade Transmissions Lines

This study utilizes ETAP software to analyze a real high voltage short circuit in scale cascade transmission lines, employing the Real Time (RT) and SCADA Integrator module for simulation, including load-flow and transient analysis, with experimental validation conducted in the Renewable Energy and Smart Grid Laboratory at UTEC, highlighting the novelty of simulating a high voltage short circuit with experimental validation.

Optimizing Modeling Efficiency With GIS Data

Optimizing Modeling Efficiency With GIS Data

ETAP and EnergyTron collaborate to integrate GIS data into power system software, streamlining the design process for brownfield projects by providing valuable information on existing electrical assets and terrain features, although the success relies on the accuracy and completeness of the GIS data.

Natural gas well power network management using ETAP NetPM

Natural gas well power network management using ETAP NetPM

Explore our innovative solution utilizing ETAP to manage the challenges of power distribution networks in Queensland's Western Downs region, where dynamic infrastructure and evolving gas well lifecycles necessitate robust data collection, network monitoring, and reliable studies, bolstered by stringent cybersecurity measures and a collaborative master model shared among subcontracted consultancies to ensure reliability and efficiency.

Evaluation of generator protective relay current transformer (CT) saturation using ETAP

Evaluation of generator protective relay current transformer (CT) saturation using ETAP

Explore the complexities of current transformer (CT) saturation's impact on protective relay performance in high fault current scenarios, examining the importance of accurate CT selection and contrasting ETAP's saturation analysis capabilities with traditional methods in a real-world scenario, providing insights to enhance protective relay operation and system reliability.

How ETAP Arc Flash Calculator helped me detect significantly flawed arc-flash studies

How ETAP Arc Flash Calculator helped me detect significantly flawed arc-flash studies

I categorize findings from arc flash study reports, noting errors in spelling, grammar, data input, and layout, but the most critical, like inconsistent results, demand attention; I rely on the ETAP arc flash calculator to detect significant inaccuracies, exemplified by a case with a GE Prolec transformer, emphasizing the need for meticulous data review to prevent mislabeling incidents.

Managing European Arc-Flash Safety Requirements using ETAP

Managing European Arc-Flash Safety Requirements using ETAP

Explore how ETAP can assist in meeting European directives for arc flash studies and understand the distinctions between North American and European electrical safety standards, offering crucial insights for professionals.

How to Advance Results Accuracy: Transitioning Arc Flash Studies to IEEE 1584-2018

How to Advance Results Accuracy: Transitioning Arc Flash Studies to IEEE 1584-2018

Explore how outdated Arc Flash Study findings were overcome by utilizing ETAP software to update equipment data, validating short circuit currents, and generating fresh Arc Flash results aligned with the 2018 standard, providing the client with enhanced safety measures and confidence in their protocols.

ETAP ArcFault™ - High Voltage Arc Flash Analysis

ETAP ArcFault™ - High Voltage Arc Flash Analysis

ETAP ArcFault™ software is recommended for performing Arc Flash Analysis on electrical utilities and renewable power systems operating at 15 kV and above.

ETAP Arc Flash IEEE 1584-2018

ETAP Arc Flash IEEE 1584-2018

ETAP Arc Flash Analysis software is used to perform arc flash analysis for systems from 0.208 kV to 15 kV in accordance with IEEE 1584-2018 “IEEE Guide for Performing Arc Flash Hazard Calculations.” The software determines the incident energy and arc flash boundary values required to comply with NEC equipment labeling. It also provides hazard evaluation for shock protection and arc flash PPE according to NFPA 70E 2018.

ETAP Grid Code™に準拠するための系統連系調査の実施方法

ETAP Grid Code™に準拠するための系統連系調査の実施方法

世界の電力セクターが持続可能なエネルギーへと急速に移行する中、グリッドコードの相互接続調査の重要性が最も高まっている。グリッドコードを手作業で分析するのは時間がかかり、複雑なシナリオや厳格なコンプライアンスが必要になる;ETAP Grid Codeは、電力系統の設計と運用のライフサイクル全体を通じて、地域のグリッドコードや規格への適合を保証するためのソフトウェアツールと制御ハードウェアを含む、モデル駆動型のソリューションです。さらに、ETAP’独自の発電所コントローラー(ePPC)とそのデジタルツインは、コンプライアンスを改善し、リスクを最小化するために、システムの実際のパフォーマンスの正確な評価と研究を保証します。

The Red Sea Utility Grid is in the Tabuk province of Saudi Arabia. The site is a vast 33,000 km2 of islands, lagoon, coastal plain and mountains with extremely diverse marine life and terrestrial landforms. The grid is divided into four off-grid microgrids. The focus of this presentation is about three of the microgrids that are very similar in size and operation. Each of these microgrids includes two PV generation (total 6 MW), two battery storages (total 5MW, ~18 MWh), and two emergency backup diesel generators (~ total 3.8 MW). The system is designed to achieve high reliability by having redundancy at various levels.

Utilizing ETAP Power Plant Controllers & integrated SCADA for Multi-Area Renewable Energy Systems

Utilizing ETAP Power Plant Controllers & integrated SCADA for Multi-Area Renewable Energy Systems

Large power plants are designed and operated to maximize reliability. This is typically done by having multiple points of interconnection and networked configuration. In case of a failure or loss of one point of interconnection, the plant can be reconfigured by closing a coupling breaker and transferring power to another point of interconnection. However, to ensure optimal operation of the power plant, it is important to have a reliable control system that can handle such real-time changes in system configurations. Traditional PLC-based and non model-driven control systems struggle with such real-time changes of the configuration. ETAP Power Plant Controller (ePPC) is a model-driven solution that simplifies the control and management of multi-area power systems. ePPC can handle real-time changes in system configurations, enabling the controller to adjust quickly to any changes in the power network, ensuring optimal operation of the power plant. Additionally, ePPC uses a digital twin concept that allows for easy configuration and simulation of different system setups. The use of the digital twin concept means that any errors can be identified and resolved before implementation, ensuring efficient and effective setup of the power plant. Overall, ePPC offers a valuable solution for controlling multi-area renewable energy systems, providing real-time control with simple setup and reliable operation. 

Track, Analyze & Reduce CO2 Emissions in Electrical Networks with  ETAP Sustainability Analysis

Track, Analyze & Reduce CO2 Emissions in Electrical Networks with ETAP Sustainability Analysis

Estimating carbon emissions, or the CO2 footprint, is a critical global concern due to its direct correlation to climate change. Governments worldwide are implementing initiatives and incentives to reduce CO2 emissions in various sectors, including generation plants, transmission and distribution grids, and industrial facilities.

Power, Efficiency, and Stability for Off-Grid Microgrid Control

Power, Efficiency, and Stability for Off-Grid Microgrid Control

Learn how the ETAP Microgrid Controller solution leverages an electrical digital twin from design to validation and automation of Off-Grid (permanently Islanded) Microgrids. In this session, active and reactive power control, optimal dispatch and secondary frequency control will be demonstrated.

Explore ETAP Power System Monitoring and Simulation (PSMS™)

Explore ETAP Power System Monitoring and Simulation (PSMS™)

 In today's dynamic power industry, staying ahead of challenges and ensuring optimal system performance is of paramount importance. ETAP PSMS addresses operations and maintenance issues, ensuring system reliability, resilience, and optimized performance. ETAP PSMS offers a comprehensive suite of lifecycle features, including SCADA, HMI, Trends, Monitored Alarms, Events, and Notifications, designed to empower your organization to monitor and operate power systems efficiently.

Learn about ETAP eSCADA - An Intelligent Alternative to Traditional SCADA

Learn about ETAP eSCADA - An Intelligent Alternative to Traditional SCADA

In recent years, more and more the electrical system generation, transmission, distribution and industrial networks are expanding, being digitized and penetrated with new technologies such as distributed generation.  Traditional SCADA solutions are no longer sufficient to support dispatchers and operators to efficiently make decisions during normal and emergency conditions.  ETAP eSCADA, based on digital twin technology, supersedes traditional SCADA’s by providing analytical solutions with operator friendly interfaces making data and recommendations available instantaneously. Yet, the system is designed to support complement standard SCADA functionality making it a complete solution.  This presentation will cover the capabilities of ETAP eSCADA for operating many different electrical networks.