183 Item(s) found

NetPM™ - 
Синхронная работа инженеров в модуле NetPM

NetPM™ -  Синхронная работа инженеров в модуле NetPM

В данном вебинаре мы покажем, как организовать синхронную совместную работу инженеров над одним проектом с помощью особенностей модуля NetPM программного комплекса ETAP. На примере проекта подстанции продемонстрируем возможности NetPM в части иерархического управления внесенными изменениями. Продемонстрируем как несколько инженеров из разных подразделений могут работать совместно над одним проектом, синхронизируя данные по силовому электрооборудованию и релейной защите.

Также, мы покажем, как синхронизировать результаты обследования объекта с моделью в проектном офисе с помощью мобильного приложения etapAPP. Вы увидите, как повышается качество проектирования за счёт эффективной командной работы с помощью NetPM.

ETAP iCE RTU

ETAP iCE RTU

etap iCE Remote Terminal Unit provides a scalable data acquisition and control RTU with multiple communication options.

ETAP iCE Gateway

ETAP iCE Gateway

etap iCE Gateway collects data from multiple devices and protocols and convert them to a single output protocol.

 ETAP Real-Time™ - обзор

ETAP Real-Time™ - обзор

Fully integrated suite of software products that provides mission critical power management solutions, from modeling to real-time, model-based monitoring and operation.

Простая конструкция заземляющей сети

Простая конструкция заземляющей сети

In this webinar, learn how to obtain accurate and economical ground grid designs by quickly identifying appropriate ground grid layouts, while efficiently conducting studies using integrated fault analysis tools. 

Cable Sizing per NF C15-100 & NF C13-200

Cable Sizing per NF C15-100 & NF C13-200

ETAP NF C15-100 & NF C13-200; Cable Sizing & Shock Protection software module offers a powerful tool to save time and improve accuracy for low & high voltage cable calculation and electrical design using the latest French Cable Standard.

Cable Thermal Analysis - Part III

Cable Thermal Analysis - Part III

This Cable Thermal Analysis webinar explains how to design cable systems to operate to their maximum potential while providing a secure and reliable operation.

ETAP ArcFault™ - High Voltage Arc Flash Analysis

ETAP ArcFault™ - High Voltage Arc Flash Analysis

ETAP ArcFault™ software is recommended for performing Arc Flash Analysis on electrical utilities and renewable power systems operating at 15 kV and above.

ETAP Arc Flash IEEE 1584-2018

ETAP Arc Flash IEEE 1584-2018

ETAP Arc Flash Analysis software is used to perform arc flash analysis for systems from 0.208 kV to 15 kV in accordance with IEEE 1584-2018 “IEEE Guide for Performing Arc Flash Hazard Calculations.” The software determines the incident energy and arc flash boundary values required to comply with NEC equipment labeling. It also provides hazard evaluation for shock protection and arc flash PPE according to NFPA 70E 2018.

Вспышка дуги в сетях постоянного тока

Вспышка дуги в сетях постоянного тока

Этот модуль вычисляет энергию дуги для различных типов оборудования сети постоянного тока.

High Voltage Arc Flash for T&D, Industrial and Renewable Systems

High Voltage Arc Flash for T&D, Industrial and Renewable Systems

Arc flash analysis extends well beyond the scope of IEEE 1584 and NFPA 70E methodology for transmission, distribution, industrial and renewable energy systems. For many years, the industry has been lacking an ‘all-in-one’ solution for performing AC and DC arc flash analysis on LV, MV, and HV systems.

IEEE 1584-2018 Arc Flash Incident Energy Calculation Method using ETAP

IEEE 1584-2018 Arc Flash Incident Energy Calculation Method using ETAP

This webinar will provide an overview of the fundamental differences between the IEEE 1584-2018 and existing arc flash methods. To better understand how the 2018 model combines empirical and arc flash physical behavior, the presentation will cover background and insights into the model development validation.

Учебное пособие по переходу с SKM на ETAP

Учебное пособие по переходу с SKM на ETAP

Migration from SKM Power*Tools® just got easier, faster and more complete! Convert your SKM Dapper & Captor project files into ETAP power system analysis software.

IEEE 1584-2018 Arc Flash Incident Energy Calculation

IEEE 1584-2018 Arc Flash Incident Energy Calculation

New Standard, New Method, New Learning Curve

Интеграция ETAP и Revit для проектирования систем электроснабжения

Интеграция ETAP и Revit для проектирования систем электроснабжения

В ходе вебинара «Интеграция ETAP и Revit» мы подробно разберем преимущества выполнения расчётов в ETAP при формировании проектных решений электрической сети и реализации проекта в Revit.

Cable Ampacity, Sizing & Shock Protection - Part II

Cable Ampacity, Sizing & Shock Protection - Part II

Proper sizing and current de-rating ensures that cables operate to their maximum potential while providing secure and reliable operation. This webinar covers cable sizing, current carrying capacity and electrical shock protection based on IEC and British standards.

Directional Overcurrent Protection of a Wind Farm Collector

Directional Overcurrent Protection of a Wind Farm Collector

The challenges of directional protection of a wind farm collector are presented in this webinar. ETAP StarZ™ Protection & Coordination module is utilized to set and analyze protection of wind power plant collectors.

StarZ - Protection & Coordination Analysis

StarZ - Protection & Coordination Analysis

Per North American Electric Reliability Corporation (NERC), 28% of protective relay mis-operations are due to incorrect settings and logics. These errors mainly stem from the existing relay testing procedures that do not provide a proper mechanism to easily and effectively evaluate the performance of all settings, logics, and the protection system as a whole. ETAP StarZ™ is a new solution to minimize protective relay setting errors and reduce the time required to perform protection and coordination studies.

Power Quality - Fundamentals of Harmonics

Power Quality - Fundamentals of Harmonics

This webinar presents the fundamentals of harmonics, harmonic distortion and its sources, and related issues such as premature equipment failure or unplanned downtime.
The presentation will demonstrate how to identify, analyze, and minimize or eliminate harmonics problems using the ETAP software.

ETAP ADMS™ -  Расширенная система управления распределением

ETAP ADMS™ - Расширенная система управления распределением

ETAP ADMS™ is a combined planning and operation solution to manage, control, visualize, and optimize electrical power distribution network comprising of GIS, SCADA, DMS, DNA & OMS.