Resource Center

Power Quality - Fundamentals of Harmonics

Power Quality - Fundamentals of Harmonics

37:09 Webinars

This webinar presents the fundamentals of harmonics, harmonic distortion and its sources, and related issues such as premature equipment failure or unplanned downtime.
The presentation will demonstrate how to identify, analyze, and minimize or eliminate harmonics problems using the ETAP software.

Induction Machine - Machine Fundamentals

Induction Machine - Machine Fundamentals

41:07 Webinars

This webinar covers machine fundamentals such as Conversion of Energy, Steady-State Operation, Motor / Generator, Ratings & Motor Equations, Efficiency & Power Factor vs. % Loading, Motor Feeder Cable and Load Flow Solutions.

Induction Machine - Machine Dynamic Behavior

Induction Machine - Machine Dynamic Behavior

1:21:03 Webinars

This webinar discusses the induction motor dynamic behavior for acceleration, deceleration and steady-state speed control conditions. It highlights how each of the key fundamental motor dynamic characteristics applies to different applications such as motor starting, fast-bus transfer, and motor parameter estimation and tuning.

Induction Machine - Motor Protection

Induction Machine - Motor Protection

1:05:59 Webinars

This webinar presents the criterion and industry guidelines for protection of motors in medium and low voltage systems, typical induction motor protection schemes and suggested settings for protective devices. The application of Automated Protection & Coordination evaluation tool for design, verification, and correction of settings are also demonstrated.

ETAP Project Merge - Project Collaboration & Data Management

ETAP Project Merge - Project Collaboration & Data Management

20:47 Webinars

Watch this webinar on project merge and learn how to use project merge to improve productively and accelerate project schedules.

ETAP 16 User-Defined Dynamic Models (UDM)

ETAP 16 User-Defined Dynamic Models (UDM)

1:11 Webinars

The User-Defined Dynamic Models (UDM) program is enhanced in the ETAP 16.0 release to allow for a more robust “element-level” and “plant-level” control system simulation. The UDM performance has been optimized for simulation of energy storage devices, wind turbine controls, PV system inverters, and generic machine models.

Comparative Study of DC Arc Flash Analysis Methods in ETAP

Comparative Study of DC Arc Flash Analysis Methods in ETAP

44:11 Webinars

In the absence of a "definitive" DC arc flash model, ETAP includes three calculation models - the "Maximum Power" method that is used in NFPA 70E, a model based on the Stokes/Oppenlander estimate of arc voltage and resistance, and a model based on Paukert's complication of research into arcing faults.

Star™ Auto-Evaluation: Automated Protection & Coordination Design

Star™ Auto-Evaluation: Automated Protection & Coordination Design

53:06 Webinars

This presentation will highlight how Star Auto-Evaluation software can improve your system design, safety, reliability and operation. Validate protective device settings for equipment protection, identify mis-coordination and fix zone selectivity issues, apply industry rules for system protection & coordination and significantly increase efficiency, accuracy, and design consistency.

Short Circuit Result Analyzer

Short Circuit Result Analyzer

29:43 Webinars

This webinar will present the new Short Circuit Analyzer. This time-saving feature compares and filters various short circuit reports in a single display.

Protective Device SQOP for Short Circuit and Arc Flash

Protective Device SQOP for Short Circuit and Arc Flash

39:53 Webinars

Learn about the features and benefits of using Sequence-of-Operation (SQOP) to achieve an accurate and realistic Protective Device (PD) operating time under bolted and arcing fault conditions.

Low Voltage Cable Capacity, Sizing & Protection against Electric Shock

Low Voltage Cable Capacity, Sizing & Protection against Electric Shock

34:07 Webinars

ETAP provides a comprehensive, integrated design and analysis solution for electric power systems. This webinar will highlight several study cases to demonstrate the software’s capabilities in LV system modeling for cable capacity, sizing and protection against electric shock, as well as reporting and project deliverables.

Intelligent Switching Sequence Management

Intelligent Switching Sequence Management

41:46 Webinars

This Webinar presents capabilities of ETAP Switching Sequence Management (SSM) for design, planning, and online operations.

Generation Optimization for Microgrids

Generation Optimization for Microgrids

44:35 Webinars

This webinar demonstrates how ETAP can help you optimally utilize limited power generation resources in an islanded or grid-tied microgrid environment.

ETAP Intelligent Load Shedding

ETAP Intelligent Load Shedding

1:10:00 Webinars

This webinar demonstrates the latest enhancements to the ETAP Intelligent Load Shedding - ILS™ solution. ILS is a model-driven load preservation system offering proactive load shedding that can dynamically manage the stability of the system by responding faster to disturbances.

ETAP GRID™ - Integrated Smart Grid Solutions

ETAP GRID™ - Integrated Smart Grid Solutions

17:28 Webinars

ETAP GRID™ is the most comprehensive enterprise solution for design, simulation, operation, control, optimization, and automation of generation, transmission, distribution, and microgrid power systems.

ETAP 14 Tips & Tricks

ETAP 14 Tips & Tricks

• Time-saving shortcuts
• Customizable workspace Look & Feel
• One-line view graphics & presentations
• Annotations & Results
• Powerful rule-based automated designs

Design, Analyze & Operate Photovoltaic Power Systems with ETAP

Design, Analyze & Operate Photovoltaic Power Systems with ETAP

1:09:47 Webinars

This webinar will highlight a case study, including lessons learned, for a commercial solar system from photovoltaic modeling to AC & DC time series power flow analysis to power monitoring and real-time predictive simulation.

Contingency Analysis

Contingency Analysis

Contingency Analysis (CA) is a "what if" scenario that evaluates, provides and prioritizes the impacts on an electric power system whenever typically unplanned problems or outages occur.

Cable Thermal Analysis for Underground Raceways

Cable Thermal Analysis for Underground Raceways

58:06 Webinars

Learn how to save design time using the Raceway Rulebook to auto-layout cables within duct banks. Find out how to determine the optimal cable sizes, physical attributes, and maximum derated ampacity using Neher-McGrath method and IEC 287 standard.

ETAP 14 Compliance with Arc Flash NFPA 70E 2015

ETAP 14 Compliance with Arc Flash NFPA 70E 2015

36:32 Webinars

Compliance requirements of NFPA 70E - 2015 Edition using ETAP 14 Arc Flash Analysis: Compliance with the Latest Standards and Guidelines, New AC and DC Arc Flash Modes, Study Case, and Interface Arc Flash Analyzer Enhancement, New Sequence-of-Operation for IEC Arc Flash, New Enclosure Isolation for Main & Load Protective Devices, New Correction Factors for Arc Current and Incident Energy.

20 of 27 results